
FS301 Flame Simulator
The FS301 is used to test the complete range of FDS flame detectors; intelligent visual flame detectors and multi spectrum flame detectors; without the need for scaffolding.
About the product
The FS301 is used to test the complete range of FDS flame detectors; intelligent visual flame detectors and multi spectrum flame detectors; without the need for scaffolding.

The FS301 is ATEX certified for operation in Zones 1 and 2 hazardous areas.. The simulator is supplied with a rugged transit case for safe transportation to locations worldwide.
The simulator is a completely self-contained unit designed for hand held use by a single operator. A single charge of the batteries is sufficient to test in excess of one hundred detectors.
The FDS301 outputs a live video signal over standard twisted pair cable. The live video provides instant visual verification of fire eliminating the need to send personnel into potentially hazardous situations and reducing the risk of injury. Although the FDS301 transmits live video images, it is not necessary to utilize them as the unit will still be a fully functioning flame detector.
Each FDS301 incorporates an on-board Micro-SD card capable of recording 17 seconds of the alarm video – 8.5 seconds pre-alarm and 8.5 seconds' post-alarm. This feature proves invaluable during incident analysis. It means you will never have an unknown alarm. Operators who have experienced fires have used the recording to put preventative measures in place to ensure the same incident does not occur again.
Unlike any other flame detector on the market, the sensitivity of the detector is pre-set, and no configuration is required. The detector is sensitive to fires of n-heptane 0.1m2 at up to 44m within a 90° Horizontal field of view. The sensitivity of the detector is pre-set and no changes in sensitivity are required.
With FM, FMC, IECEx, ATEX, CE, and SIL2 approval, the FDS301 is accepted worldwide. This acceptance is enhanced with a range of metric and imperial threads, and both PAL and NTSC video modes.
Markets
Each flame detector application presents its own set of unique challenges. Understanding these challenges and using the right detector is critical for success. These guides will help you to resolve common problems by using Micropack detectors.
-
Chemical
Our flame detectors are designed and certified to detect many of the substances used in the chemical industry.
Read application note -
Aviation
Our technology is trusted by many of the world's largest airlines to protect their high-value assets.
Read application note -
Waste
Our Visual Flame Detection technology is recommended for use in waste management facilities by government agencies.
Read application note -
Food/Beverage
Our detection technologies arewidely used in the food/beverage industry, providing reliable protection for critical processes.
Read application note -
Oil & Gas
Our detectors are designed for the oil and gas industry, where fast optical flame detection is critical and false alarms are not an option.
Read application note -
Power Generation
Gas turbines present unique fire detection challenges. Our iVFD technology is designed to overcome all of these issues and provide reliable detection.
Read application note
Interested in the product but your market is not on the list?
Related Products
-
Innovative flame detection for hazardous industries. Live video. Rapid response. No false alarms. Ignores ‘friendly’ flames. Explosion-proof.
FDS301 Intelligent Visual Flame Detector -
Innovative flame detection for hazardous industries. Live video. Rapid response. No false alarms. Ignores ‘friendly’ flames. Explosion-proof.
FDS300 Intelligent Visual Flame Detector -
Innovative flame detection for hazardous industries. IR3 (triple-IR). Rapid response. No false alarms. Explosion-proof.
Micropack FDS303 Multi-Spectrum IR Flame Detector